Hanna Instruments HI 8000 Series - Manual (Page 32)

32
This panel displays the set and current amount of fertilizer used for a specific
program. The Fertigation Controller controls the dosing of 4 fertilizers. In this
panel the fertilizer number is used as the index, allowing inspection of the per-
cent values for up to four fertilizer tanks involved in the selected irrigation pro-
gram. This panel contains the following information:
Program Number
Reflects the selected program (can be selected only inside panel C 03). See
Section 5.2.
Fert
Represents the index for this panel. Fertilizer tank number. Each program
can control 1 to 4 fertilizer tanks.
Set
The set percentage of one of four selected fertilizers to be dosed.
Current
The current consumed percentage of one of four selected fertilizers.
System clock
NOTE: The fertilizers percentage values can be specified using S 39 (SET FER-
TILIZERS).
5.2.13 AGITATOR STATE – C 17
Prog 08
Work 00:03 WORK
Pause 00:02 13:15
AGITATOR STATE C17
To each of the 4 fertilizer tanks an agitator can be assigned . The agitators can
be activated before dosing of a fertilizer, during dosing, or intermittently through-
out the program. See Section 3.6 AGITATOR CONTROL for more information.
In this panel the agitator number is used as the index. This panel contains the
following information:
Program Number
Reflects the selected program (can be selected only inside panel C 03). See
Section 5.2.
Work
The set working time value for the indexed agitator of the selected pro-
gram.