Hanna Instruments HI 8000 Series - Manual (Page 28)

28
Day
Indicates if the selected program is set to run on a daily schedule.
Period
Indicates if the selected program is set to run on a yearly schedule.
System clock
5.2.6 PRIOR & CONFLICTS – C 09
Prog 08 Priority 05
Conflict Programs 02
13:15
PRIOR & CONFLICTS C09
This panel indicates the priority level of the indexed program. Priority settings
play a roll in program execution when two or more programs have similar start-
ing conditions. The priority for a given program can be set using panel S 33
(SET PRIORITY). The Conflict Programs counter displays cyclically all programs
that are in conflict with the currently active program. Programs can be in conflict
if their specific start and running conditions are synchronous. Given this sce-
nario, the program that has the highest priority will become active.
The program number indexes this panel. This panel contains the following infor-
mation:
Program Number
Reflects the selected program (can be selected only inside panel C 03).
See Section 5.2.
Priority
Displays priority of indexed program.
Conflict Programs
Cyclically displays the program number of programs in conflict with the
currently active program.
System clock
5.2.7 IRRIG STATE – C 10
Prog 08 IRRIG
Set 01:15:20+005:55
Done 00:45:10 13:15
IRRIG STATE C10