Hanna Instruments HI 8000 Series - Manual (Page 37)

37
5.4 ALARMS CONSULTING
5.4.1 ACTIVE ALARMS – C 25
Low level fert: 4
ACTIVE Alarm
26-12 14:36:22 13:15
ALARM 02/07 C25
This displays the active alarms current in the system. Once viewing the panel all
of the alarms can be scrolled and viewed using the UP and DOWN or ENTER
keys. This panel contains the following information:
Alarm Description
Time of alarm occurrence.
Alarm
The alarm number and (/) total number of all active alarms.
System clock
When at least one active alarm is present, the system clock blinks “ALARM”.
This indication is displayed on all panels having the system clock.
NOTE: The alarm management system is designed to provide self-update
behavior, thereby no user intervention is required to restore the status of
the interrupted program once the condition is resolved. If the condition
of the active alarms change, the panel will reflect the change accord-
ingly without user intervention.
5.5 LOG CONSULTING
5.5.1 VIEW LOG DATE – C 26
Log consulting date:
26-12
15:05
VIEW LOG DATE C26
This panel allows the user to view log data from a specific date. The SET key is
used to enter the date of choice thus entering the setting mode. After entering the
panel and pressing the SET key, the cursor (focus) is shifted from the panel
number to the first place of the day indicator. The key pad and arrow keys can be
used to enter the selected date followed by the ENTER key. Once ENTER is