Hanna Instruments HI 8000 Series - Manual (Page 22)

22
5 PANEL DESCRIPTION
5.1 GENERAL CONSULTING
The following panels C 01 through C 29 are for the general consulting of
controller settings and current measurements. The data objects within each
panel are described from left to right unless otherwise specified.
5.1.1 INITIALIZATION PANEL
HANNA INSTRUMENTS
F1 CONTROLLER V0.90
INITIALIZATION
Loading String Table
This panel is shown during the Fertigation Controller Initialization state; it con-
tains the HANNA INSTRUMENTS logo, the name of the controller and the
software version. The last line is used to display the current status of the initializa-
tion sequence. This panel is also used to display any possible errors that may
occur during the start up sequence.
5.1.2 START PANEL
HANNA INSTRUMENTS
F1 CONTROLLER
Fri 15-03-2000 13:15
STOP Press ENTER
5.1.3 INPUT PASSWORD PANEL
Enter password
****
This panel is displayed during the password authentication sequence. If this
sequence fails, the user will be logged out and the START panel will be displayed.
If the password is correct panel C 01 (GENERAL INFO) is displayed. The de-
fault password is 0000. See section 6.9.10 (Setting Password, S 60) for instruc-
tions on setting this feature.