Hanna Instruments HI 8000 Series - Manual (Page 47)

47
fertilization process. The program number indexes this panel. This panel displays
and allows the setting of the following parameters:
Manual
The selectable manual adjustment to the irrigation process.
Program Number
Reflects the selected program (can be selected only inside panel C 03). See
Section 5.2.
SolRad irrig
The selectable adjustment to the irrigation process as a result of the effects
of accumulated solar radiation.
5.7.13 SOLAR RAD IRRIG – S 43
Prog 07
Level: 0350W/m2
Accumul: 2500Wh/m2
SOLAR RAD IRRIG S43
This panel allows the settings regarding the accumulated solar radiation feature.
The program number indexes this panel. This panel displays and allows the
setting of the following parameters:
Program Number
Reflects the selected program (can be selected only inside panel C 03). See
Section 5.2.
Level
The selectable solar radiation sensor threshold.
Accumul
The selectable solar radiation accumulation threshold used to initiate the
counting of accumulation for irrigation control.
5.7.14 SET AGITATORS – S 45
Pre 00:33 Prog 08
Work 00:10
Pause 00:05
SET AGITATORS S45
An agitator can be assigned to each of the 4 fertilizer tanks . The agitators can
be activated before dosing the fertilizer, during dosing, or intermittently through-
out the program. If “Pre” is set, the agitator will activate prior to dosing. If
“Work” is set without “Pause” the agitator will work throughout the lifetime of the