Hanna Instruments HI 8000 Series - Manual (Page 29)

29
This panel displays the current irrigation state of the indexed program. Time or
volume can control irrigation and the above panel displays the set value and the
amount of irrigation currently completed. The mode of irrigation (time or vol-
ume) can be selected using panel S 53 (IRRIG CTRL MODE). The program
number indexes this panel. This panel contains the following information:
Program Number
Reflects the selected program (can be selected only inside panel C 03).
See Section 5.2.
Set
Displays the required (set) value of irrigation in time or volume.
Irrigation correction value
(number directly following the Set value)
Done
Displays the current point of irrigation in time or volume.
System clock
5.2.8 SOL RAD EXTENT – C 11
Prog 08
+010%
+00:05:55 13:15
SOL RAD EXTENT C11
This panel displays how much the programmed irrigation parameters are modi-
fied (extended) due to the effects of solar radiation. The program number indexes
this panel. This panel contains the following information:
Program Number
Reflects the selected program (can be selected only inside panel C 03).
See Section 5.2.
Irrigation extension percentage
Displays the overall extension percentage of irrigation for the selected pro-
gram due to solar radiation.
Irrigation extension value
Displays (in time or volume) the extension value of irrigation for the se-
lected program due to solar radiation.
System clock