Hanna Instruments HI 8000 Series - Manual (Page 41)

41
(for more details see Section 3.1 and Appendix 3):
Work day
The number of consecutive workdays.
Program Number
Reflects the selected program (can be selected only inside panel C 03). See
Section 5.2.
Rest day
The number of consecutive rest days.
Weekday
Week-day labels.
Workday
Use the yes or no indication (on the keypad) below each weekday label to
indicate specific workdays for the indexed program.
5.7.3 SET PRIORITY – S 33
Prog 07
Priority 04
Sectors/Group 08
SET PRIORITY S33
This panel allows the setting of priority level for each program. Programs can
share the same priority level. When a conflict occurs between two programs with
the same priority, the program that has the earliest starting time will be executed
first. The program number indexes this panel (For more details see Section 3.1
and appendix 3). This panel displays and allows the setting of the following
parameters:
Program Number
Reflects the selected program (can be selected only inside panel C 03). See
Section 5.2.
Priority
The priority level. This number can be set from 1 to 5, where 5 is the highest
priority.
Sectors / Group
The number of sectors/groups for the indexed program is the maximum
number of valves that will be opened simultaneously.