Hanna Instruments HI 8000 Series - Manual (Page 43)

43
allows the setting of the following parameters:
Program Number
Reflects the selected program (can be selected only inside panel C 03). See
Section 5.2.
Start times
Six individual (selectable) hour settings start within the daily schedule limits
for the indexed program.
NOTE: 00:00 is the not set value of the start time and the irrigation program
does not start at 00:00.
5.7.6 SET PROGRAM REPEATS – S 36
Prog 07
Repeats 04
Pause 00:30:00
PROGRAM REPEATS S36
Once a program is triggered it is possible to set it to be repeated by using this
panel. The program number indexes this panel (for more details see Section 3.1
and Appendix 3). This panel displays and allows the setting of the following
parameters:
Program Number
Reflects the selected program (can be selected only inside panel C 03). See
Section 5.2.
Repeats
Selects the total number of repetitions following the initial execution of the
indexed program.
Pause
Selects the amount of delay time between repetitions.
5.7.7 PRE/POST IRRIG – S 37
Prog 07
PreIrrig: 000:00:05
PostIrrig: 000:00:05
PRE/POST IRRIG S37
Prior to and/or after the execution of the indexed program, the amount of pre
and post irrigation can be specified in time or volume. To set irrigation control