FeiYu Tech FY-3ZT - Manual (Page 38)

GuiLin FeiYu Electronic Technology Co., Ltd.
GuiLin FeiYu Electronic Technology Co., Ltd http://www.feiyudz.cn E-mail: [email protected]
Page 37
- Save your file and it will start communicating with the autopilot panel and began to
record telemetry data to the track log file.
- If a port connection is established successfully, the ―Connect‖ button will turn from Red
to Green.
7. A Red plane icon will appear at your current position and direction will be shown on the map
after the GPS has a lock and the autopilot connection is successful. The flight path will be
shown in blue if the plane is flown to a different location.
8. If the GPS status shows satellites signal strength as more than 4 bars, please proceed to check
if the autopilot control parameters, servo and plane condition work OK. Otherwise, perform
Gyro initialization again (go to Parameter Setting: Par2).
Setting flight route and Return Point