beautypg.com

Fy-3zt power supply – FeiYu Tech FY-3ZT User Manual

Page 15

background image

GuiLin FeiYu Electronic Technology Co., Ltd.

GuiLin FeiYu Electronic Technology Co., Ltd http://www.feiyudz.cn E-mail: [email protected]

Page 14

FY-3ZT Power Supply

1. To ensure uninterrupted autopilot function, it is critical that your power system outputs a stable

and clean 5 volt power source to the FY-3ZT system.

2. To avoid current fluctuations, ideally the power source supply to the servos should be separate

from the autopilot.


3. If the power source for the Autopilot system and servos are the same, then we highly

recommend a battery or BEC supply with higher than 3 amps output. Do check this rating
especially if you are using your ESC‘s internal BEC supply as some ESC BECs are not rated for
3amp output.

4. We highly recommend a separate power source for the autopilot system from the receiver and

servos, as this has shown to produce the best results.