Removing the primary battery, Removing the primary battery -3, To remove the battery for any reason see – Eurocom D700T Enigma User Manual
Page 99: Removing the primary bat

Upgrading The Computer
Removing the Primary Battery 6 - 3
6
Removing the Primary Battery
If you are confident in undertaking upgrade procedures yourself, for safety
reasons it is best to remove the battery (batteries).
1.
Turn the computer off, and turn it over.
2.
Move the battery release latches in the direction of the arrows
-
.
3.
The battery will pop -up.
4.
Lift the battery
out of the battery bay.
5.
When re-inserting the battery, make sure that it is firmly pushed down into
the bay and the battery release latches click back into position.
Warranty Warning
Please check with your
service representative
before undertaking any
upgrade procedures to
find out if this will VOID
your warranty.
2nd Battery
If you have included
the secondary battery
in your purchase con-
figuration, remember
to remove the second-
ary battery before un-
dertaking any upgrade
procedures (see page
).
1
2
3
1
2
3
Figure 6 - 1
Battery Removal