Eurocom D700T Enigma - Manual (Page 131)

Troubleshooting
Display 8 - 9
8
Display
Problem Possible Cause - Solution
Nothing appears on
screen. The system is in a power saving mode. Toggle the sleep/resume key combination, Fn + F4
(see
“Sleep Button” on page 3 - 8 ).
\
The screen controls need to be adjusted. Toggle the screen control key combinations Fn +
F8/F9). If you’re connected to an external monitor, make sure it’s plugged in and turned on.
You should also check the monitor’s own brightness and contrast controls.
The computer is set for a different display. Toggle the screen display key combination, Fn
+ F7 (see
“Function Key Combination” on page B - 7 / C - 5 ). If an external monitor is
connected, turn it on.
The screen saver is activated. Press any key or touch the TouchPad.
No image appears on the
external monitor I have
plugged in and powered
on. You haven’t installed the video driver and configured it appropriately from the Control
Panel. See
“What to Install” on page 4 - 1 for instructions on installing the driver, and
see “NVIDIA Video Driver Controls” on page B - 1 or “ATI Video Driver Controls” on
page C - 1 for instructions on configuring the video driver.