Eurocom D700T Enigma - Manual (Page 90)

BIOS Utilities
5 - 10 Advanced Menu
5
Reset Configuration Data:
This item is set to No as default. You can change the setting to Yes if you have
installed a new add-on which has reconfigured the system, resulting in such a
serious system conflict that the operating system is unable to boot.
Hyper-Threading Technology
Enable Hyper-Threading (it is “Enabled” by default) to increase performance
of your computer depending on the hardware and software you use (all the
processor options in this notebook series support Hyper Threading Technolo-
gy). Hyper Threading is supported fully in Windows XP, but it is strongly
recommended you DO NOT enable this option in other operating sys-
tems. Once you have enabled Hyper-Threading, DO NOT disable the op-
tion. (If you do disable the option you will need to reinstall your operating
system.)
Power On Beep
Use this menu to enable/disable the single beep sound at the end of the POST.
This item is “Disabled” by default.
Boot Logo Screen:
This menu item allows you to enable/disable the Boot Logo Screen as the
computer starts up (it is “Disabled” by default). This will affect what sort of
POST screen you see.