Echelon DM-21 Device Manager - Manual (Page 19)

Device Manager User’s Guide 2-5
The Type 1 Base Plate is mounted to a suitable US 4” square (figure 2.3), 2” deep
(10.16cm x 5.08cm) electrical box, US double gang electrical box (figure 2.4), or an
IP-65 (NEMA 4) enclosure.
DM-21
Module
Base Plate
4" Square
Electrical Box
Figure 2.3 DM-21 Module 4” Square (2” Deep) Electrical Box Mounting Configuration
DM-21
Module
Base Plate
Double Gang
Electrical Box
Figure 2.4 DM-21 Module Double Gang (2” Deep) Electrical Box Mounting Configuration
The Type 1D DIN Base Plate may be mounted to either a 35mm DIN rail or to a
wall panel (figure 2.5). A jumper plug supplied with the Base Plate permits the
power and network connections of several Type 1D DIN Base Plates to be
interconnected without additional wiring.