Echelon OpenLDV User Manual
Page 59
OpenLDV Programmer’s Guide
51
Return Code
Numeric
Value
Description
LDV_DEVICE_UPDATE_FAILED
33
The device information
specified for the
ldv_set_device_info()
function could not be updated.
LDV_STD_DRIVER_TYPE_READ_ONLY
34
The driver information
specified for the
ldv_set_driver_info()
function could not be updated
because the driver type is read
only.
LDV_OUTPUT_BUFFER_SIZE_MISMATCH
40
Output buffer sizes (for both
priority and non-priority
buffers) must be the same.
Applies to APP/NET buffers
on the network interface.
LDV_INVALID_BUFFER_PARAMETER
41
The specified buffer parameter
is not valid (for example, the
specified size is too large).
Applies to APP/NET buffers
on the network interface.
LDV_INVALID_BUFFER_COUNT
42
The specified buffer count is
not valid.
Applies to APP/NET buffers
on the network interface.
LDV_PRIORITY_BUFFER_COUNT_MISMATCH
43
All priority buffers must have
the same count. For example,
if one of the priority output
buffer counts is zero, then
both must be zero.
Applies to APP/NET buffers
on the network interface.
LDV_BUFFER_SIZE_TOO_SMALL
44
The specified buffer size is too
small to support subsequent
buffer configuration changes.
Applies to APP/NET buffers
on the network interface.