Configuring an xdriver profile – Echelon OpenLDV User Manual
Page 102
94
Using the xDriver Default Profile
Configuring an xDriver Profile
You can edit an xDriver profile to configure a number of parameters that impact
how xDriver handles uplink and downlink sessions, including the automatic
reconnection settings. Most applications will use the xDriver default profile.
You can use the automatic reconnection feature to cause xDriver to attempt
reconnection when sessions that use the default profile are terminated as a result
of power outages, network interface failures, or other communications failures.
With automatic reconnection enabled, xDriver attempts reconnection until a
failed session has been successfully reestablished, or until a predefined time
period expires.
To edit an xDriver profile, perform the following steps:
1. Open the Windows Control Panel and double-click the L
ON
W
ORKS
Interfaces icon to open the L
ON
W
ORKS
Interfaces application, as shown in
Figure 8. The left-hand device pane shows all of the currently defined
devices.
See the L
ON
W
ORKS
Interfaces online help for a complete description of
the user interface.
Figure 8. L
ON
W
ORKS
Interfaces Application
2. From the main window, select an RNI Interface, then select Settings →
Edit Profile to open the Properties dialog, shown in Figure 9 on page