D-Link DCS-5220 - Manual (Page 88)

D-Link DCS-50 User Manual
Section - Configuration
Show the video of a specified channel
This section depicts the method of how to show the video of a specific channel in a display window.
Step 1: Move the mouse cursor to the camera you would like display in the window.
Step 2: Press and hold the left mouse button, and then drag it
to a display window in the video area on the right side of the
screen. Note that the cursor will change according to the area
in order to indicate whether the area is droppable or not.
Step 3: Release the left mouse button while on top of a
display window. The video will appear in the display window
as shown below. In each display layout, only one window
can be assigned to a camera. Also, each camera must have
its own separate window when displayed. Once the video is
in a display window, it can be dragged and dropped to other
windows. If you drag one camera’s video to a window that
already has its own camera’s video, the two cameras will trade
display windows. Dragging and dropping is a very convenient
way to manipulate the video channels in the IP surveillance Software.