D-Link DCS-5220 - Manual (Page 11)

11 D-Link DCS-50 User Manual
Section - Configuration
D-Link Click’n Conenct (DCC)
DCC will show the MAC address and IP address of your DCS-5220. If you have a DHCP* server on your network,
there will be a valid IP Address displayed at the end of DCC process. You can begin to use the IP camera
now.
*A DHCP server is a device that supplies IP Addresses to its
clients that are on the same network.
Configuration
Turn on the computer and Insert the D-Link DCS-5220 Driver CD in the CD-ROM drive. The step-by-step instructions
will help you to search and setup your IP camera smoothly and quickly.
If the CD Autorun function does not automatically start on your computer, click Windows ® Start > Run. In the Run
command box type “D:\DCS5220.exe”, where D: represents the drive letter of your CD-ROM. If it does start, proceed
to the next screen.
Click Start