Using & configuring the dcs-5220 with a nat router, Setting up the dcs-5220 for use behind a router – D-Link DCS-5220 User Manual

Page 113

D-Link DCS-50 User Manual

Section - Security

D-Link’s DCS-5220 is a versatile and cost effective Internet Camera offering both video and audio monitoring. It can

also serve as a powerful surveillance system in security applications. The DCS-5220 can be used with any wired or

802.11b/g wireless router. This section explains how to view the camera from either the Internet or from inside your

internal network.
Materials Needed:

• 1 DCS-5220 Internet Camera

• 1 Ethernet Cable

• A Wired or Wireless router such as the D-Link DIR-655 Wireless Router

• Ethernet based PC for system configuration

Setting up the DCS-5220 for Use Behind a Router

Installing a DCS-5220 Internet Camera on your network is an easy 4–step procedure:

1 Assign a Local IP Address to Your Internet Camera

2 View the Internet Camera Using Your Internet Explorer Web Browser

3 Access the Router with Your Web Browser

4 Open Virtual Server Ports to Enable Remote Image Viewing

This section is designed to walk you through the setup process for installing your camera behind a router and enable

remote video viewing. For the basic setup of the DCS-5220, follow the steps outlined in the Quick Installation Guide.

Using & Configuring the DCS-5220 with a NAT Router