D-Link DCS-5220 - Manual (Page 20)

0 D-Link DCS-50 User Manual
Section - Configuration
Click on the Client Setup button to change settings
related to the camera connection.
Click on the Logout button to logout from the camera
server and close the browser.
Click the Pan / Tilt button to control the camera ‘s pan
or tilt. The Home button can move the camera to the
preset home position.
Select from the preset drop-down list to quickly move the
camera to the desired preset position. (Please refer to
“camera control” setup for the preset list function).
This can change the camera Pan/Tilt speed.
Press this button and the camera will start to pan from
left to right one time.
This will stop Auto Pan and Auto Patrol.
Click this button to quickly move the camera to the
desired patrol setup according to preset positions.
(Please refer to “camera control” setup for the preset
list function).
Click on the Snapshot button to capture a snapshot
image. The image will pop up in a new window. This
image can be saved to your local hard drive.
The image from the DCS-5220 should be visible from the device’s Home page on your web browser.
Home Page Screen
Client Setup:
Logout:
Pan / Tilt :
Go to:
Pan/Tilt Speed:
Auto Pan:
Stop:
Auto Patrol:
Snapshot: