D-Link DCS-5220 - Manual (Page 108)

10 D-Link DCS-50 User Manual
Section - Configuration
For detailed information about each setting, please refer to Configuration > Advanced > Motion Detection in the
section titled “Using the DCS-5220 With an Internet Browser” (page 29).
Next, run the IP surveillance program. Click on the Configurations button and select Scheduler.
In the Primary Schedule you can choose either Once (for one time recording) or Every Day (for scheduled recording).
For example, if you would like to record events every day during a certain time frame, click on the beginning time
and drag your mouse to the ending time. Schedule recording can be configured by minutes, hours, days, weeks, or
months.
The Secondary Schedule allows you to set a schedule
outside the Primary Schedule. The Secondary Schedule
provides two options to record without a specified date or
time. You can select Event Mode, which will record whenever
an event is triggered, or Continuous Mode, which will begin
continuously after scheduling settings are saved. You do
not need to set the Secondary Schedule with the Primary
Schedule. To schedule video recording with motion detection,
you can use either the Primary Schedule or Secondary
Schedule, or both.