D-Link DCS-5220 - Manual (Page 45)

5 D-Link DCS-50 User Manual
Section - Configuration
Click Apply on this screen to restore the factory default settings. After confirmation, the system will restart and require
the DCC program to locate the IP address of the DCS-5220.
Backup and Restore
Check this option to turn off the LED next
to the lens. This will prevent anyone from
observing the operation of the Internet
Camera.
This option will reset the camera back
to its factory default settings. This will
remove all the configuration settings that
were made previously.
This option will restart the camera.
Turn off the front panel LED:
Restore to Factory Default:
Reboot: