Getting ready tosew, Choosing and changing accessories, Changing presser feet – SINGER 3103 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2. Getting Ready
toSew
Choosing and
Changing Accessories
CAUTION* Disconnect
the
power
line
plug
from the socket outlet when changing needles,
feet, or needle plates, or when leaving the
machine
unattended.
This
eliminates
the
possibility
of
starting
the
machine
by
accidentally pressing the speed controller.
Changing Presser Feet
•
Raise needle to highest position by turning
the hand wheel toward you.
•
Raise presser foot.
1. Press toe of presser foot upward as far as
it wii) go until it snaps free.
2.
Centre the new presser foot under the
shank A. Lower the presser foot lifter so
that the shank fits over the presser foot
pin.
3. Press presser foot screw down firmly until
foot snaps into place.
J K