Zig-zag pattern stitching, Setting selectors, Stitch pattern selector – SINGER 3103 User Manual
Page 37: Needle position selector, Stitch width selector, Vwv'vvvwvw\'wv'v\.'v
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4. Zig-Zag Pattern
Stitching
/VWv'VVvWvW\'Wv'v\.'V
Setting Selectors
Before turning selector, make sure needle is out
of the fabric.
1. Stitch Pattern Selector
# With your sewing machine you can do two
kinds of zig-zag stitching; plain
zig-zag
and blindstitching
The pattern selector, located on the control
panel, controls stitch selection.
To Select Pattern
•
First make sure needle is above fabric.
e For plain zig-zag stitching, slide pattern
selector lever to ^
•
For blindstitching, slide pattern selector
lever
2. Needle Position
Selector
e Most of your zig-zag stitching will be done
in centre ( ^ ) needle position.
•
Left (
) and right (
) settings are used
for special stitch placement.
3. stitch Width Selector
To produce a plain zig-zag or a decorative
stitch, the stitch width selector is moved
from its straight stitch position J to
any of its other four positions. The further
you move the selector toward the right, the
wider your stitch will be.
35