Canon C3200 - Manual (Page 56)

Placing Originals 1-39
Introduction to Sending Functions
1
IMPORTANT
• If you are placing the original on the platen glass, the size of the original is detected
after the feeder/platen cover is closed. Be sure to close the feeder/platen cover
before scanning.
• If the original contains fine text or print, such as a map, the machine may need to
read or scan the document several times. Do not remove the original from the
platen glass until scanning is complete.
NOTE
• Remove the original from the platen glass when scanning is complete.
• The size of STMT and STMTR originals cannot be detected. After pressing
(Start), follow the instructions on the screen to specify the original size. You can
also manually select the paper size.