Canon C3200 - Manual (Page 54)

Placing Originals 1-37
Introduction to Sending Functions
1
Platen Glass
You should use the platen glass when scanning bound originals (such as books
and magazines), originals on heavy or lightweight paper, and transparencies into
memory. You should also place the original on the platen glass when you want to
scan an 11" x 17" original with an image that extends all the way to the edges
without the periphery of the original being cut off. (See "Document Size," on p. 3-7.)
NOTE
The machine automatically detects the size of the following originals: 11" x 17", LGL,
LTR, and LTRR.
1
Lift the feeder/platen cover.
IMPORTANT
This machine is equipped with an open/close sensor on the feeder/platen cover
(see circled area in the above illustration). When placing originals on the platen
glass, lift the feeder/platen cover about 11 7/8" (300 mm) so that the sensor
detaches from the feeder/platen cover. If the sensor does not detach from the
feeder/platen cover, the size of the originals may not be detected correctly.
2
Place your originals face down.
Sensor