Canon C3200 User Manual
Page 211
Sending Methods
5-22
Sending Documents
5
NOTE
•
To use this feature, you must store sender names beforehand. (See "Registering
Sender Names," on p. 1-16.)
•
If you set the unit's name in TX Settings, the unit's name is automatically registered
as <00>. To set the unit's name, press
(Additional Functions)
➞
[Communications Settings]
➞ [TX Settings] under
[Unit Name]. (See "Registering the Unit's Name," on p. 1-19.)
12
Press [Done].
The display returns to the Send Basic Features screen.
13
Press
(Start).
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display
➞ press
(Start) once for each original. When
scanning is complete, press [Done].
Scanning starts.
The scanned data is sent to the specified destination when scanning is complete.
NOTE
If the Preview key is lit, the Preview display setting is turned on, and you can verify
the images from the Preview screen before sending your document. (See
"Previewing Originals," on p. 5-34.)