Toa M-864D - Manual (Page 56)

56
28. SPECIFICATIONS
28.1. M-864D
Version CE/CE-GB CE-AU CU
Power Source 220 – 240 V AC, 50/60 Hz 220 – 240 V AC, 50 Hz 100 – 120 V AC, 60 Hz
Power Consumption 30 W
Frequency Response 20 Hz – 20 kHz, ±1 dB
Sampling Frequency 48 kHz
Dynamic Range 100 dB or more
Distortion 0.03 % or less, 1 kHz, +4 dB* input/output, 20 Hz − 20 kHz BPF
Crosstalk −80 dB or less, 1 kHz
Input Monaural input, 8 channels, removable terminal block (3 P)
Phantom power (+24 V DC, 10 mA, ON/OFF switchable for each channel)
Gain setting (settable for each channel)
: PAD ON Gain min., +4 dB* (max. +24 dB*), 10 kΩ, electronically-balanced
Gain max., −14 dB* (max. +6 dB*), 10 kΩ, electronically-balanced
: PAD OFF Gain min., −10 dB* (max. +10 dB*), 7 kΩ, electronically-balanced
Gain max., −56 dB* (max. −36 dB*), 7 kΩ, electronically-balanced
Stereo Input (L, R), 7 channels (1-A, 1-B, 1-C, 2-A, 2-B, 2-C, front-mounted input),
RCA jack (stereo mini jack provided on the front panel)
: −10 dB* (max. +10 dB*), 10 kΩ,
Trim gain for each individual channel: −∞ to 0 dB (except front-mounted input)
• 1-A (L), 1-B (L), and 1-C (L) are mixed after passing through each trim gain
circuit (the same applies to R channel)
• 2-A (L), 2-B (L), and 2-C (L) are mixed with front-mounted input after
passing through each trim gain circuit (the same applies to R channel)
Output 4 channels, +4 dB* (max. +24 dB*), applicable load 600 Ω or more,
electronically-balanced, removable terminal block (3 P)
REC OUT (L, R): –10 dB* (max. +10 dB*), applicable load 1 kΩ or more, RCA jack
Gain is adjustable.
AD Converter 24 bits
DA Converter 24 bits
Preset Memory 16
Signal Processing Section
Automatic Resonance
Control (ARC) Function
Automatic EQ curve creation by ARC, 4 channels (each output channel), settable
independently on each channel
Feedback Suppressor
(FBS) Function
Feedback suppressor filter creation, 8 channels (each monaural input channel),
settable independently on each channel
Filter 8 channels (each monaural input channel), settable independently on each
channel, high-pass filter: 20 Hz − 20 kHz
Tone Controller BASS, Low-shelving filter: 20 − 500 Hz, ±15 dB
MID, parametric equalizer: 20 Hz − 20 kHz, ±15 dB
Q: 0.267 − 69.249
TREABLE, high-shelving filter: 6 − 20 kHz, ±15 dB
10 channels (each monaural input channel, each stereo mixing input channel),
settable independently on each channel
Equalizer Parametric equalizer: 20 Hz − 20 kHz, ±15 dB, Q: 0.267 – 69.249
4 channels (each output channel)
Matrix 12 x 4
Crosspoint Gain −∞ to 0 dB in 1 dB steps
Automatic Mute Function Stereo input section matrix, independent control
* 0 dB = 0.775 V