Toa M-864D - Manual (Page 14)

14
9. ASSIGNMENT SETTINGS
It is possible to assign each input to 4 output channels (OUTPUT 1, 2, 3, and 4).
INPUTs 1 – 8 INPUTs ST 1 and 2
Assignment switch
Assignment indicator
M-864D
Assignment switch
Assignment indicator
9.1. Assignment Switches of Inputs 1 through 8
It is possible to assign each monaural input to Outputs 1 through 4.
Pressing the Assignment switch 1 causes the corresponding indicator to light, routing the input signal to the
OUTPUT 1. The Assignment switches 2 through 4 serve as the same function as the Assignment switch 1.
Assignment switch Output destination
1 OUTPUT 1
2 OUTPUT 2
3 OUTPUT 3
4 OUTPUT 4
[Assignment setting example]
Set the Assignment switches of the inputs as the table below.
Input Assignment switch
MONO INPUT 1 1, 2
MONO INPUT 2 2, 3
MONO INPUT 3 1
MONO INPUT 1 MONO INPUT 2 MONO INPUT 3 : Unlit
: Lit
Assignment switch
Assignment indicator
Note
Use a fine-tipped object to
press in the Assignment switch.