Toa M-864D - Manual (Page 26)

26
[Adjusting the volume level]
Step 1. Press the Recording output switch (REC OUT).
Note: Use a fine-tipped object to press in the switch.
Each indicator status changes as follows.
• Recording output indicator: Lights green.
• Trim control mode indicator: Lights orange.
• Setting value indicators around the control knob:
All indicators flashes twice, then the indicators around the L and R channels knobs indicate each
corresponding output level.
Lit
Lit
Flashes twice Lit
(Example)
Lit
Step 2. Adjust the recording output volume level with the control knob.
Default value 0 dB
Setting range –∞, –44 to +10 dB (in 1 dB steps)
The figures below show the relationship between the setting value indicators around the control knob
and the recording output level.
All indicators go off.
–∞
1 indicator lights.
–44 dB
1 scale advances
in 6 dB steps
1 scale advances
in 6 dB steps
5 indicators light.
–20 dB
All indicators light.
+10 dB
: Lit
: Unlit