Toa M-864D - Manual (Page 12)

12
8. SYSTEM CONFIGURATION EXAMPLE
The M-864D can be used alone or in conjunction with a PC and external control device.
• Using the M-864D unit in conjunction with a PC
PC
M-864D
Switching hub
• Using the M-864D unit in conjunction with the ZM Remote controller
• Using the M-864D unit in conjunction with the external control device
M-864D
External control device
M-864D
ZM Remote controller
42. Recording output terminals [REC OUT L, R]
–10 dB*, 1 kΩ, unbalanced type, RCA jack.
Mixed signal of Buses 1 through 4 selected by the
supplied M-864D PC Software is output.
43. Stereo input terminals [STEREO INPUT 1, 2,
A, B, C]
–10 dB*, 10 kΩ, unbalanced type, RCA jack. (See
p. 54, "BLOCK DIAGRAM.")
44. Monaural input terminals
[MONO INPUT 1 – 8, E, C, H]
–56 to +4 dB*, 10 kΩ (PAD ON)/7 kΩ (PAD OFF),
balanced type, removable terminal block.
Input sensitivity can be selected by the Control
knobs (6) when the control mode is the Gain
control mode.
* 0 dB = 0.775 V