Toa M-864D User Manual

Page 45

2. Operation indicators

Light if the assigned function is enabled when the

Function button is pressed.

3. Address selector [ADDRESS]

Used to set the ZM-9011 address (0 – F).

Set the address value not overlapping with the

value assigned to other ZM Remote controller.

The address number ranges from 0 to 9, and A to

F in numerical and alphabetical order.

4. Data line connection terminals

[LINK A, LINK B]

Connect the communication line from the M-864D.

The communication line has polarities. Match the

polarities of data line connection terminals to those

of the D-864D’s data line connection terminals. As

2 sets of these terminals are internally connected

in parallel, either can be used to connect to other

ZM Remote controller.

5. 24 V DC terminals

Connect the power cable from the M-864D.

25.1.2. ZM-9012 Remote Control Panel

The ZM-9012 performs volume control of the assigned input/output channel with the volume control knob in

connection to the M-864D, and also indicates the volume set position of the assigned channel.

It can be mounted in one-gang electrical box.

[Front]

[Side]

1. Volume set position indicator

Indicates the volume level set with the volume

control knob.

The set level is indicated with 7-point LED.

2. Volume control knob

Adjusts the volume level of the

EXT VOL or Cross

point gain.

Channel assignment for which volume level is to be

controlled is performed by the PC with the supplied

M-864D PC Software installed. For details, read

the separate Software instructions.