TeeJet Swath XL SmartPad II - Manual (Page 17)

SmartPad II
Software Version 4.03
Chapter 1 - Introduction 1-9
System Specifications and Requirements
System Specifications and Requirements
Lightbar
• ABS / Polycarbonate alloy construction,
• Molded cables with weatherproof connectors,
• High-lumen red, yellow and green LEDs,
• 8 character, high-intensity alpha-numeric LED display.
Interface Cables
• 12 V DC power,
• Reverse polarity and high / low voltage protection,
• Status detection leads for boom master on/off,
• Additional cables lengths available for increased mounting capabilities.
SmartPad II
• VGA - TFT (Touchscreen) with adjustable backlight,
• Sealed membrane keypad,
• Internal alarm,
• Dimensions: 4.75" W x 9.84" H x 1.83" D (120.7 mm x 250 mm x 46.5 mm),
• Weight: 23 Oz. (652 g.),
• OS: Windows CE.Net 4.2
GPS Receiver Compatibility
The SmartPad II product does not include a GPS receiver. SmartPad II is compatible with any differentially
corrected, sub-meter GPS (D-GPS) receiver which outputs NMEA 0183 data at 2Hz or greater. MID-TECH
recommends the MID-TECH Rx-350p, Rx-360p or Rx400p DGPS receiver for the SmartPad II product.
Optional CompactFlash Storage Card
• SanDisk Standard Grade 128MB CompactFlash
MID-TECH can not guarantee data integrity if the optional SanDisk 128MB CompactFlash storage card is
not used with the SmartPad II system. Not all CompactFlash cards are created equal. If you choose to use a
CompactFlash card other than the recommended card option; MID-TECH will not be held responsible for
lost data, product malfunction or card incompatibility. MID-TECH will not make any hardware modifica-
tions to the SmartPad II product to accommodate any non-compatible CompactFlash cards.