StarTech.com SV1641HDIE - Manual (Page 44)

Instruction Manual
39
• PPP (Point-to-Point Protocol) must be used; no other authentication methods are supported.
• TCP/IP must be installed/enabled on the computer making the connection, and
must be used for the dial-up connection.
• The connection must be configured to obtain a dynamic IP address.
• The user name/password must match a user currently configured on the IP KVM switch.
• For best performance and to simplify the troubleshooting process, firewall software
should not be used with the dial-up connection.
Accessing the Web Interface
Once a dial-up connection has been established, you can access the Web interface or
start a VNC session using the following IP address:
https://99.99.99.99
You can now login to the Web interface (and/or VNC session) normally. Note that the
remote machine (the one you dialed from) is automatically assigned the IP address
99.99.99.100 for the PPP session. This, and the IP address of the IP KVM switch, cannot
be modified. The following TCP/IP port numbers are assigned for a PPP connection,
regardless of the settings configured in the Web interface for the LAN ports:
HTTPS: 443
VNC (clear-text): 5900
VNC (SSL secured): 15900
SSH: 22