StarTech.com SV1641HDIE - Manual (Page 24)

Instruction Manual
19
Using the Terminal Interface via Serial Port
The terminal interface you can access via the serial port permits the configuration of
the basic settings of the IP KVM switch. While not intended to be a substitute for the
Web interface, it does allow you to configure some of the same functions. The menu
list below describes the options that can be modified through the terminal interface.
Note that you must use the ‘W’ option to confirm and apply any changes made before
you exit the terminal session.
If you changed the status of the Ethernet Bridging feature, you will also need to power
the IP KVM switch on and off again to enable your changes.