Ethernet address (mac address) – StarTech.com SV1641HDIE User Manual
Page 19
Instruction Manual
14
Clicking the Commit button applies any changes made on this page, but leaves the old settings
active until the next time the unit restarts. Clicking Make changes effective now applies the
changes and restarts the IP KVM switch so the new settings take effect immediately.
Ethernet Address (MAC Address)
This is the Ethernet hardware address of this unit’s LAN port. It is set at the factory and
cannot be changed. You may need this number to configure your DHCP server.
This menu will allow you to add accounts other than admin to the system. These
accounts will not have the authority to change settings, but can access the Web
interface and log into the VNC console. Selecting Delete permanently removes the user
from the system. If you enter values for a user that does not already exist under Edit
User Details, the system will create that user for you when you click Record changes. If
the user already exists, you will change the password for that user.
User Accounts