Reznor R6GN Option - Installation - High Static Blower Drive - Light Commercial - Manual (Page 22)

22
P6SP-090* HSD kits:
920559 (208-230V, 3Ø, 60 Hz)
920558 (460V, 3Ø, 60 Hz)
Horizontal Flow Performance Chart* ‡ Indicates Factory Sheave Setting for Pre-confi gured Units
External
Unit Static
(in-Wg)
Operating @
230 or 460
Volts
Adjustable Motor Sheave Setting
Fully
Closed
1/2 Turn
Open
1 Turn
Open
1.5 Turns
Open
2.0 Turns
Open
2.5 Turns
Open
3.0 Turns
Open ‡
3.5 Turns
Open
4.0 Turns
Open
4.5 Turns
Open
5.0 Turns
Open
5.5 Turns
Open
6.0 Turns
Open
1.2
CFM
RPM
kW
1.3
CFM 3397 3341 3284
RPM 1178 1171 1163
kW 2.34 2.20 2.06
1.4
CFM 3303 3210 3117
RPM 1192 1181 1169
kW 2.24 2.10 1.96
1.5
CFM 3434 3214 3065 2916
RPM 1233 1205 1189 1173
kW 2.44 2.15 2.00 1.85
1.6
CFM 3296 3098 2911 2723
RPM 1241 1217 1197 1177
kW 2.33 2.11 1.90 1.68
1.7
CFM 3406 3168 2929 2717 2505
RPM 1278 1252 1226 1204 1181
kW 2.52 2.27 2.01 1.79 1.57
1.8
CFM 3240 3000 2759
RPM 1285 1258 1231
kW 2.41 2.14 1.87
1.9
CFM 3334 3088 2869
RPM 1316 1289 1266
kW 2.56 2.25 2.00
2.0
CFM 3435 3178 2921
RPM 1347 1321 1294
kW 2.73 2.44 2.15
* Requires horizontal conversion kit. Please refer to unit TSL for kit number.
Values includes losses for: Unit Casing, 2” Disposable Filters & Dry Evaporator Coil
Values shown refl ect operation at 230V or 460V. For operation at 208V, deduct 0.025 from unit static.
Deduct 250 Cfm for electric heater kits
3862
Indicates a recommended unit operational point 1159
3.03
3493
Indicates an allowable setting that is not recommended for unit operation †
† These operational points should be carefully examined by the installer for proper unit setup and heater operation if used.
1017
2.07
Indicates a setting that is not permitted for unit operation
Table 18. Blower Performance for P6SP-090* Units
(7.5 Ton Horizontal Models Only)