Reznor R6GN Option - Installation - High Static Blower Drive - Light Commercial - Manual (Page 15)

15
R6GP-072*-100C MSD kits:
920609 (208-230V, 3Ø, 60 Hz)
920560 (460V, 3Ø, 60 Hz)
Downfl ow Performance Chart ‡ Indicates Factory Sheave Setting for Pre-confi gured Units
External
Unit Static
(in-Wg)
Operating @
230 or 460
Volts
Adjustable Motor Sheave Setting
Fully
Closed
1/2 Turn
Open
1 Turn
Open
1.5 Turns
Open ‡
2.0 Turns
Open
2.5 Turns
Open
3.0 Turns
Open
3.5 Turns
Open
4.0 Turns
Open
4.5 Turns
Open
5.0 Turns
Open
5.5 Turns
Open
6.0 Turns
Open
0.8
CFM
RPM
kW
0.9
CFM 2619 2336 2096
RPM 979 951 924
kW 1.14 0.96 0.86
1.0
CFM 2607 2312 2043
RPM 1008 984 956
kW 1.23 1.06 0.88
1.1
CFM 2535 2332 2010
RPM 1035 1012 988
kW 1.23 1.11 0.88
1.2
CFM 2743 2529 2225 2004
RPM 1089 1065 1039 1016
kW 1.48 1.27 1.06 0.97
1.3
CFM 2475 2231 2042
RPM 1094 1069 1043
kW 1.28 1.13 1.01
1.4
CFM 2512 2176 2046
RPM 1125 1099 1074
kW 1.38 1.16 1.08
1.5
CFM 2450 2266
RPM 1154 1129
kW 4.38 1.23
1.6
CFM 2292
RPM 1159
kW 1.34
Values include losses for: Unit Casing, 2” Disposable Filters, Dry Evaporator Coil & Installed Heat Exchanger
Values shown refl ect operation at 230V or 460V. For operation at 208V, deduct 0.025 from unit static.
3862
Indicates a recommended unit operational point 1159
3.03
3493
Indicates an allowable setting that is not recommended for unit operation †
† These operational points should be carefully examined by the installer for proper unit setup and heater operation if used.
1017
2.07
Indicates a setting that is not permitted for unit operation
Table 11. Blower Performance for R6GP-072* Units
(6 Ton Downfl ow Models Only)