Reznor R6GN Option - Installation - High Static Blower Drive - Light Commercial - Manual

Light Commercial
High Static Blower Drive Kits
6 - 15 Ton Light Commercial Package System
INSTALLATION INSTRUCTIONS
WARNING:
ELECTRICAL SHOCK, FIRE OR EXPLOSION
HAZARD
Failure to follow safety warnings exactly could result
in serious injury or property damage.
Improper installation or servicing could result
in dangerous operation, serious injury, death or
property damage.
• Before servicing, disconnect all electrical power
to the unit.
• When servicing controls, label all wires prior to
disconnecting. Reconnect wires correctly.
• Verify proper operation after servicing.
KIT # 918799 918800 920394 920395 920396 920558 920559 920606
Motor X X X X X X X
Ext. Motor Overload X
Overload Adapter X
Motor Sheave X X X X X X X
Blower Pulley X X X X X X X X
Drive Belt X X X X X X X X
Overload Wires X X X X X X X
Parts Kit X X X X X X X X
KIT # 920607 920608 920609 920613 920618 920560 920637
Motor X X X X X X X
Ext. Motor Overload X X X X X
Overload Adapter X X X X X
Motor Sheave X X X X X X
Blower Pulley X X X X X X X
Drive Belt X X X X X X X
Overload Wires X X X X X X X
Parts Kit X X X X X X X
NOTE TO INSTALLER: The blower drive kits listed in Table 1 are
applicable only to NORDYNE units equipped with NORDYNE
motors. The use of these kits with non-NORDYNE motors may
not produce the same values shown in the airfl ow tables or
other data provided.
Table 1. Blower Drive Kit Contents & Part Numbers
GENERAL
These instructions are primarily intended to assist qualifi ed individuals experienced in the proper installation of heating and/
or air conditioning appliances. Some local codes require licensed installation/service personnel for this type equipment and
their accessories. All installations must be in accordance with these instructions and with all applicable national and local
codes and standards. Please read all instructions thoroughly before installing the kit.
WARNING:
Improper installation, service, adjustment, or
maintenance can cause fi re, electrical shock, or
other conditions which may result in personal
injury or property damage. Unless otherwise noted
in these instructions, only factory authorized kits,
parts or accessories may be used when modifying
this equipment.