beautypg.com

Juniper Systems TK6000 User Guide User Manual

Page 8

background image

8

Field PC Owner’s Manual

4. Insert the tab on the top of the battery door into the case

slots Close the battery door.

5. Reattach the battery door of the unit.

Charge the Battery Packs

Before using the Field PC for the first time, it is important to

make sure the batteries are completely charged. Charge the

battery/batteries while inside the unit. Complete the following

steps to charge the batteries:
1. Attach the outlet adapter into the wall charger.
2. Plug the wall charger into an outlet.
3. Plug the other end of the wall charger into the DC jack on

the Field PC.

4. Charge the Field PC at least 4 hours per battery to get a full

charge.