Juniper Systems TK6000 User Guide - Manual (Page 36)

6
Field PC Owner’s Manual
Connecting to a PC
Re-establishing an ActiveSync® Connection
To re-establish an ActiveSync ® connection, follow these steps:
Note: The unit can charge while connected.
1. Plug USB Client end (mini B) of the USB communications
cable into the Field PC.
2. Plug the USB Host end (full size A) into the desktop
computer. ActiveSync ® automatically establishes a
connection between the Field PC and the desktop computer.
3. Follow the instructions on the desktop computer screen.
Note: Microsoft ActiveSync
® version 4.5 or later is required to
connect to the Field PC. Information can be found at our website,
www.junipersys.com, for establishing other connections.
Re-establishing Windows Mobile ® Device Center Connection
Complete the following steps to reestablish a Windows Mobile ®
Device Center connection.
1. Plug the USB Host (full sized A) into available port on the
desktop computer.
2. Plug the other end, USB Client (mini B) into the Field PC.
Windows Mobile Device ® Center will automatically open.
3. Follow the steps on the screen.
Information for Software Developers
This information can be located on our website at
www.junipersys.com.