Juniper Systems TK6000 User Guide User Manual

Page 51

Taking your Field PC out of Extended Storage

While storing the battery pack, it naturally discharges slightly

while being inactive. When you are ready to use your Field PC

after storing it for an extended period of time, complete the

following steps:
1. Insert the battery pack(s).
2. Turn on the Field PC.
3. Enter 10% on the Battery Settings pop up screen.
4. Tap on the Accept button to save the new setting.
5. Plug the Field PC into the external AC wall charger and

charge the battery pack in the Field PC until the batteries

are fully charged.

Protecting the Touchscreen

Protect the touchscreen from impact, pressure, or abrasive

substances that could damage it. To further protect the

touchscreen, apply one of the screen protectors that came with

the Field PC.

cAUTiON:

Be sure to replace the screen protector as often as

the screen protector packaging directs.

To apply a screen protector, follow the directions on the

packaging.

Cleaning the Field PC

In some environments, the Field PC is exposed to substances,

such as pitch or tar, which require stronger cleaning supplies

for removal.

cAUTiON:

Some of the available cleaning supplies/chemicals

on the market will damage the case.

Safe Cleaners to Use

The Field PC can be cleaned safely with the following cleaners:

Greased Lightening Multi-Purpose Cleaner
Orange Clean (Orange Glo International)
Fantastik Oxypower (SC Johnson)
Orange Cleaner Oil Eater (Kafko International, Ltd.)
Chain Pro (Midwest Polychem, Ltd.)



Ch 7 Care and Maintenance