Bluetooth® drivers and profiles – Juniper Systems TK6000 User Guide User Manual
Page 38
8
Field PC Owner’s Manual
This chapter explains how to setup a Bluetooth Partnership on
the Field PC.
Bluetooth® Drivers and Profiles
Microsoft
®
Bluetooth drivers are loaded onto the Field PC at
the factory. These drivers support the following profiles: serial
port, file transfer, audio/visual control, dial up networking,
object push, human interface device, and advanced audio
distribution.
Identify the power status of Bluetooth using Wireless Manager
To determine the power status of the Bluetooth tap Start >
Settings > Connections tab > Bluetooth > Mode tab.
Note: By default, Bluetooth is turned off. If the Bluetooth is turned on
and then the device is suspend, the Bluetooth turns off while the Field
PC is suspended to save battery power. When the Field PC resumes
(turns on), Bluetooth turns on automatically.
Make the Field PC Discoverable to Another Device
To allow other devices that use Bluetooth wireless technology
to detect the Field PC and communicate with it, make the
device discoverable or establish a partnership with the other
device.
Follow these steps to make the device discoverable:
1. Tap Start > Settings > Connections tab.
2. Tap Bluetooth.