Juniper Systems TK6000 User Guide - Manual (Page 21)

Protecting the Touchscreen
The touchscreen is sealed to protect your device against water
and dust. To protect your touchscreen, we recommend that you
apply a touchscreen protector.
cAUTiON: If the screen protector is not replaced as often as
the screen protector packaging directs the touchscreen may be
damaged.
Calibrating the Touchscreen
If the touchscreen is not responding accurately to stylus taps,
try calibrating the touchscreen manually using the following
steps:
1. Tap Start > Settings. The Settings window appears.
2. Select the System tab at the bottom of the display.
3. Scroll down and tap on the Screen icon.
4. When the Screen window appears, tap Align Screen.
5. Follow the directions on the display to calibrate the
touchscreen.
6. After you calibrate the touchscreen, the Screen window
appears again. Tap OK to exit the screen.
Disabling the Touchscreen
The Field PC allows you to disable and enable the touchscreen
to prevent extraneous entry of data when you are not using
touchscreen data entry. To disable or enable the touchscreen,
press the Touchscreen key.
!!
Ch 3 Using the Hardware
1