beautypg.com

Juniper Systems TK6000 User Guide User Manual

Page 42

background image

Field PC Owner’s Manual

4. The Add a Device screen appears. Tap on the name of the

device you want to set up as an outgoing port.

5. Select a numbered COM port from the list of ports that

appear. If the port cannot be created, it is in use. Select a

different numbered port.

6.

important:

Deselect the Secure Connection option below

the list of COM ports, as shown above. Deselecting this

option ensures that the device disconnects its Bluetooth

connection only when you tell it to.

7. Tap Finish.
Once the virtual COM port is assigned using the outgoing

Bluetooth COM port, specify the COM port assignment within

your application as explained in the user documentation for the

application. An example follows.
Suppose you are using a Bluetooth-enabled GPS receiver with

the device and a navigation program on the Field PC. In this