Juniper Systems TK6000 User Guide - Manual (Page 20)

0
Field PC Owner’s Manual
Restoring the Device to its Factory Settings
Follow the steps below to restore user storage, settings, and
icons on your Field PC to their original factory defaults.
cAUTiON: Restoring the Field PC to its original factory state
will permanently erase data saved, any software you installed,
and any changes you made on the Field PC, including settings
changes.
To perform a clean boot, which restores everything but the
“storage” folder, select Reset from the Power Button menu and
immediately press and hold Ctrl + Alt + Del.
To perform a storage clean, which cleans the “storage” folder,
select Reset from the Power Button menu and immediately
press and hold down Ctrl + Alt + 2.
Perform both a clean boot and a storage clean for a complete
reset to factory settings.
Using the Stylus
Below are instructions for tasks using the stylus.
To do this . . . Follow these steps
Select an item Tap once.
Open an item or file Tap the item or file twice.
Open a context menu
for an item
Tap and hold the item. The context
menu appears.
Cut or copy Tap and hold until the context menu
appears. Select Cut or Copy.
Paste Tap and hold the area where you
want to paste. Select Paste from the
context menu that appears.
Drag and drop Tap and drag the item to the
destination. Lift up the stylus.
Select multiple items Drag the stylus over the items.
Using the Touchscreen
This section explains how to protect, calibrate, and disable the
touchscreen.
!!