beautypg.com

Juniper Systems TK6000 User Guide User Manual

Page 18

background image

18

Field PC Owner’s Manual

Communication Ports

The Field PC has the following communication ports located at

the top of the case:

Two 9 pin serial port (COM 1 and COM 2)
USB A (host) port
USB B mini (client) port

Powering Off, Suspending, Resetting, and Restoring 
Factory Defaults

The Power button allows you to suspend, power off, or reset the

device. A series of keyboard actions also lets you restore the

hard drive, settings, and icons to their original factory defaults.

Below are instructions for each action.

Powering Off the Device

When the device is powered off, it closes all programs and

powers down all system components except for the real-time

clock. Unlike suspend mode, the device resets when it is

powered on again. Any unsaved data will be lost.
To preserve battery power, we re/commend you power off the

device if it will be left unused for two weeks or longer.
To power off the Field PC,

1. Save all open files and close any running programs.
2. Press and hold the Power button until the Power Button

menu appears.