Juniper Systems Allegro CE Manual - Manual (Page 155)

Windows CE Page 4-95
Always replace the item on my device
This selection makes all files on the desktop PC the master files. In the
event of a possible unresolved file, the same named file on the Allegro
is always replaced with the file on the desktop PC.
Always replace the item on this computer
This selection makes all files on the Allegro the master files. In the
event of an unresolved file, the same named file on the desktop PC is
always replaced with the file on the Allegro.
▲ ▲ ▲ ▲ ▲ USB MultiSync Connections
To use the USB MultiSync feature, you will need the following:
- USB/Power Dock for each Allegro
- Desktop PC running Windows 2000
- ActiveSync installed on the desktop PC
- USB hubs for the multiple USB/Power Docks
To prepare the Allegros for using MultiSync you must first connect all
of the USB/Power Docks to the desktop PC through the use of USB
hubs.
Configuration for Multiple Allegro CEs and USB/Power Docks