Jaypro Sports MHWM-D-A - Manual (Page 21)

© 2005 Jaypro Sports Equipment JSL-Inst001 Rev G 10-24-2006 21 of 40
5. Controller Location and Installation
a. Install the control box within sight of the two hoists. Preferred location is at a midpoint
between the two hoists. Control panel should be a minimum of 12’ off the floor, and in the case
of wall-mounted installations the key switch should be a minimum of 4’ from the end of the
suspended mats.
Figure 20: Control Panel & Key Switch Location
b. Location for control panel should not be within range of rolled mats during the hoisting or
lowering operation. Make sure mats will not come in contact with control panel at any point.
Figure 21: Control Panel Location Interference with Mat
c. Do not drill holes with panel in place on wall as debris may become lodged in the sensitive
internal electronic components. Jaypro is not responsible for damage to equipment incurred as a
result of installer carelessness or disregard for these detailed instructions.
d. After securing the controller enclosure to the wall or other structure, call in the electrician or
electrical contractor to provide and install wiring.