Jaypro Sports MHWM-D-A - Manual (Page 11)

© 2005 Jaypro Sports Equipment JSL-Inst001 Rev G 10-24-2006 11 of 40
Regular Equipment Maintenance
1. Key Switch
a. Key switch is dual direction momentary actuated. No maintenance or upkeep should ever be
required. For additional or replacement keys call Jaypro (you must have the key number).
b. In case placard becomes worn or illegible, the correct text is included here. A replacement can
be ordered from Jaypro directly.
Figure 7: Key Switch Placard
2. Controller Enclosure
a. Electrical enclosure requires no maintenance or upkeep.
b. If unit is located in an area where direct impact from balls or other sports equipment is possible,
it may be in the best interest of the facility to build a protective enclosure around the panel box.
If unit becomes damaged or destroyed call Jaypro for a replacement.
c. Inspect all electrical connections external to box regularly, and call a qualified electrician or
electrical contractor for any desired repairs.
3. Load Bar
a. The load bar has a baked on powder coat or acrylic enamel finish which will give years of
reliable protection to the underlying steel, but may in some areas wear away or flake off. Don’t
mistake this normal wear and tear as being of structural importance; unit will continue to
operate flawlessly despite significant loss of cosmetic coatings. Spray paint can be used to
touch up surfaces as needed.
b. Periodically inspect all welds for cracking. If any damage should be discovered, the best course
of action is to have a local welding contractor inspect and repair on site as needed.